With the current state of today's economy, industry professionals throughout the nation are looking for process improvement methods to lower cost and increase efficiency; while achieving sustainable, competitive edge. With many challenges surrounding the validation of a proposed solution, process optimization often evades the best of us.

Ensuring Success with Simulation

Simulation is an approximation of reality, the level to which it mimics reality depends on the tool and method used to implement the simulation model. The closer the simulation model mimics reality, the better its results and analysis are, while the faster the model is built and validated the greater the return on investment.

LEAN ====> Eliminate Waste. Increase Efficiency

It has been proven that Lean methods improve efficiency, reduce cost, and increase the overall profitability of organizations. Although different variations of these methods have been applied to different industries, the fact remains, that if implemented correctly, Lean methods work. Today's organizations need to be very adaptive, and very dynamic in the way they react to consumer demand; and what better way to adapt than with a dynamic tool? Avoid lost opportunity and lost revenue, by eliminating slow operational response with Simcad Pro 's patented dynamic technology.

The manufacturing environment is faced with many challenges that must be properly identified, analyzed and optimized prior to implementing any operational changes. Because of the integrated nature of manufacturing environments, each component has the ability and possibility of affecting another component within the system. Due to the high inter-connectivity of the system, special attention must be paid to possible changes and how these changes affect overall system productivity and functionality. With Simcad Pro dynamic simulation, manufacturing operations have the ability to mitigate and reduce risk with the proper planning of processes prior to the implementation of changes.

Hospital Patient Wait Times : One of the most unpredictable environments in the Healthcare Industry is the Emergency Department, ED. We have all been there, spending countless hours in a waiting room only to finally receive medical attention in a hallway, or if you were lucky enough to make it to an examination room, you sat hopeless, wondering if a doctor even knew that you existed. Excessive patient wait times can be tolling on the patient both physically and emotionally; affecting the morale of the patient, doctors, nurses and medical staff. Let's take a look at some of the most common contributing factors (and their implications) which lead to one of America's biggest challenges in the healthcare community today; optimizing the ED to reduce patient wait times and increase overall efficiency.

Because of the high levels of variability that are present within a hospital, it is important to make every effort to provide patients with a positive experience, reduce wait times, increase efficiency and effectively utilize resources and staff. Simcad Pro is a sophisticated simulation engine that can be utilized to improve the overall efficiency of a hospital. Simcad Pro has been shown to improve staff allocation and layout of the hospital to increase efficiency of care without having to sacrifice the quality of administered care.

Hospital Patient Flow with Simcad Pro Health Simulation Software

With the seemingly ever increasing cost of healthcare, it is becoming more and more important to improve efficiency and to find a way to utilize resources to their fullest potential for the benefit of both the institution and the patient. After all, without patients, a medical institution would not be needed at all. This fact makes patients one of the most important factors in healthcare today. Simcad Pro Health is a sophisticated simulation engine that can be utilized to improve the overall efficiency of healthcare facilities and to improve patient flow and decrease wait times without sacrificing the quality of care being administered.

Kilgore Flares is one of four operating companies in ATK's Conventional Munitions Group. It designs and produces small, medium, and large caliber ammunition, munitions propellants, commercial gunpowder, infrared decoy flares, munitions primers and tracers. Based in the United States, Kilgore is the largest supplier of conventional IR decoys to the U.S. Department of Defense.

Automation Technologies Industries (ATI), a leader in factory automation, takes advantage of Simcad to demonstrate solution feasibility of a new conveyor line implementation for a major automotive manufacturer. The total value of this project will exceed $1.8 Million - we now have the contract and purchase order.

ABSTRACT:

The Eaton Cutler-Hammer facility has two separate areas of assembly. Eleven production lines compose the Load Center Assembly Area while 17 production lines compose the Metering/Meter Breaker/ACD Assembly Area. Currently, 11 fork trucks are used in the facility to bring parts from receiving to storage where they can be picked up when needed by the assembly lines. Fork trucks also take packaged goods from finished assembly to shipping. Fork truck drivers are often dedicated to one or two assembly lines in an attempt to meet their every need and to ensure that the assembly process does not incur downtime.

ABSTRACT:

Collins & Aikman's Rantoul Plant One currently maintains two of their three assembly lines in operation for the production of instrument panels for various automotive manufacturers. These lines are supplied with plastic components produced by high-tonnage injection molding machines within the plant and parts from external suppliers. In order to facilitate material flow within the plant, numerous high-low fork trucks are utilized in the material handling process.
 

Molded Fiber Glass had a modest beginning in 1948 in Ashtabula, Ohio, near the shores of Lake Erie. Robert S. Morrison, our founder, and a handful of dedicated men and women worked diligently together to mass-produce the first commercial products using polyester resins and fiberglass reinforcements. The watershed event in the composites industry took place in 1953. MFG was chosen to produce all FRP parts for the Corvette. This led to the FRP boats, which MFG commercialized in 1955. Since those early days, MFG has grown substantially, sometimes with great difficulty.
 

Dynamic Simulation for Lab Optimization can help increase efficiency - Utilizing Dynamic Simulation for Lab optimization can help increase efficiency, reduce travel time, control production. Reduce WIP and the overall operation cost...

Improve patient wait time and increase operational efficiency in the ED / ER - One of the most unpredictable environments in the Healthcare Industry is the Emergency Department, ED. We have all been there, spending countless hours..

Decreasing Patient Wait Time And Increasing Operational Efficiency in The ED - The Emergency Department is a critical area within the Healthcare Industry. It is also one of the most unpredictable environments. Excessive wait times within the Emergency...

The Role of Dynamic Simulation® in Process Improvement Initiatives - In every industry, from manufacturing to services, logistics and healthcare, there is an increasing need to do more with less, increase efficiency while reducing cost, and improve utilization while maximizing...

REALTIME PREDICTIVE AND PRESCRIPTIVE ANALYTICS WITH REAL-TIME DATA AND SIMULATION - This paper discusses the reusability and extensibility of simulation models and their roles in predictive and prescriptive analytics using real time data connectivity...

THE ROLE OF DYNAMIC SIMULATION IN PROCESS IMPROVEMENT INITIATIVES - In every industry, from manufacturing to services, logistics and healthcare, there is an increasing need to do more with less, increase efficiency while reducing cost...

FROM SIMULATION TO REAL-TIME TRACKING AND OPTIMIZATION - Simulation software can be an effective tool to analyze and optimize process based operations. This abstract details the implementation of a warehouse simulation using the Simcad Pro dynamic simulation...